Friday 25 January 2013

NUCLEAR BATTERIES

                                                         NUCLEAR BATTERIES



 

           Micro electro mechanical systems (MEMS) comprise a rapidly expanding research field with potential applications varying from sensors in air bags, wrist-warn GPS receivers, and matchbox size digital cameras to more recent optical applications. Depending on the application, these devices often require an on board power source for remote operation, especially in cases requiring for an extended period of time. In the quest to boost micro scale power generation several groups have turn their efforts to well known enable sources, namely hydrogen and hydrocarbon fuels such as propane, methane, gasoline and diesel.
         
         Some groups are develo ping micro fuel cells than, like their micro scale counter parts, consume hydrogen to produce electricity. Others are developing on-chip combustion engines, which actually burn a fuel like gasoline to drive a minuscule electric generator. But all these approaches have some difficulties regarding low energy densities, elimination of by products, down scaling and recharging. All these difficulties can be overcome up to a large extend by the use of nuclear micro batteries.
           
           Radioisotope thermo electric generators (RTGs) exploited the extraordinary potential of radioactive materials for generating electricity. RTGs are particularly used for generating electricity in space missions. It uses a process known as See-beck effect. The problem with RTGs is that RTGs don't scale down well. So the scientists had to find some other ways of converting nuclear energy into electric energy. They have succeeded by developing nuclear batteries.

NUCLEAR BATTERIES

           Nuclear batteries use the incredible amount of energy released naturally by tiny bits of radio active material without any fission or fusion taking place inside the battery. These devices use thin radioactive films that pack in energy at densities thousands of times greater than those of lithium-ion batteries. Because of the high energy density nuclear batteries are extremely small in size. Considering the small size and shape of the battery the scientists who developed that battery fancifully call it as "DAINTIEST DYNAMO". The word 'dainty' means pretty.

Types of nuclear batteries 

           Scientists have developed two types of micro nuclear batteries. One is junction type battery and the other is self-reciprocating cantilever. The operations of both are explained below one by one.

1. JUNCTION TYPE BATTERY

            The kind of nuclear batteries directly converts the high-energy particles emitted by a radioactive source into an electric current. The device consists of a small quantity of Ni-63 placed near an ordinary silicon p-n junction - a diode, basically.

WORKING:

             As the Ni-63 decays it emits beta particles, which are high-energy electrons that spontaneously fly out of the radioisotope's unstable nucleus. The emitted beta particles ionized the diode's atoms, exciting unpaired electrons and holes that are separated at the vicinity of the p-n interface. These separated electrons and holes streamed away form the junction, producing current.

             It has been found that beta particles with energies below 250KeV do not cause substantial damage in Si [4] [5]. The maximum and average energies (66.9KeV and 17.4KeV respectively) of the beta particles emitted by Ni-63 are well below the threshold energy, where damage is observing silicon. The long half-life period (100 years) makes Ni-63 very attractive for remote long life applications such as power of spacecraft instrumentation. In addition, the emitted beta particles of Ni-63 travel a maximum of 21 micrometer in silicon before disintegrating; if the particles were more energetic they would travel longer distances, thus escaping. These entire things make Ni-63 ideally suitable in nuclear batteries.

TO DOWNLOAD THIS CLICK ON THE BELOW LINK

http://www.ziddu.com/download/21425608/NUCLEARBATTERIES.docx.html 

WIRELESS POWER TRANSMISSION VIA SOLAR POWER SATELLITE - ABSTRACT

                       INTROUCTION to Wireless Power Transmission via Solar Power Satellite 



                 The major problem facing Planet Earth is provision of an adequate supply of clean energy . It has been that we face "...three simultaneous challenges -- population growth, resource consumption, and environmental degradation -- all converging particularly in the matter of sustainable energy supply." It is widely agreed that our current energy practices will not provide for all the world's peoples in an adequate way and still leave our Earth with a livable environment. Hence, a major task for the new century will be to develop sustainable and environmentally friendly sources of energy.

                Projections of future energy needs over this new century show an increase by a factor of at least two and one Half, perhaps by as much as a factor of five. All of the scenarios from reference 3 indicate continuing use of fossil sources, nuclear, and large hydro. However, the greatest increases come from "new renewables" and all scenarios show extensive use of these sources by 2050. Indeed, the projections indicate that the amount of energy derived from new renewables by 2050 will exceed that presently provided by oil and gas combined. This would imply a major change in the world's energy infrastructure. It will be a Herculean task to acquire this projected amount of energy. 

             This author asserts that there are really only a few good options for meeting the additional energy needs of the new cen Projections of future energy needs over this new century show an increase by a factor of at least two and one Half, perhaps by as much as a factor of five. All of the scenarios from reference 3 indicate continuing use of fossil sources, nuclear, and large hydro. However, the greatest increases come from "new renewables" and all scenarios show extensive use of these sources by 2050. Indeed, the projections indicate that the amount of energy derived from new renewables by 2050 will exceed that presently provided by oil and gas combined. This would imply a major change in the world's energy infrastructure. It will be a Herculean task to acquire this projected amount of energy. This author asserts that there are really only a few good options for meeting the additional energy needs of the new century in an environmentally acceptable way.One of the so-called new renewables on which major reliance is almost certain to be placed is solar power. 
       
         Solar power captured on the Earth is familiar to all. However, an alternative approach to exploiting solar power is to capture it in space and convey it to the Earth by wireless means. As with terrestrial capture, Space Solar Power (SSP) provides a source that is virtually carbon-free and sustainable. As will be described later, the power-collecting platforms would most likely operate in geosynchronous orbit where they would be illuminated 24 hours a day (except for short eclipse periods around the equinoxes). Thus, unlike systems for the terrestrial capture of solar, a space-based system would not be limited by the vagaries of the day-night cycle. Furthermore, if the transmission frequency is properly chosen, delivery of power can be carried out essentially independent of weather conditions. Thus Space Solar Power could provide base load electricity.

Tuesday 1 January 2013

DCOM ---- ABSTRACT AND SEMINARS

                            ABSTRACT OF DISTRIBUTED COM   (DCOM)


CLICK ON THE BELOW LINK TO DOWNLOAD THIS ABSTRACT

                        http://www.ziddu.com/download/21240223/DISTRIBUTEDCOM.docx.html